Car ATV Engine Lifting Gear Crane Hoist

This 1 Ton folding crane is delivered in knock down form(Self Build) for reduced freight cost. Fast folding model provides easy storage and transportation. Heavy-duty castors. Weighs only 74kg and is perfect for mobile or workshop use. Side pump access with removable handle.

Lifting Cap in Position 1:1000kg

Lifting Cap in Position 2:750kg

Lifting Cap in Position 3:500kg

Lifting Cap in Position 4:250kg

Maximum Lift Ht at Minimum Jib Extn:1855mm

Maximum Lift Ht at Maximum Jib Extn:1990mm

Length of Jib Position 1:893mm

Length of Jib Position 2:983mm

Length of Jib Position 3:1073mm

Length of Jib Position 4:1163mm

Height of Frame:147mm

Length of Frame:1518mm

Overall Height:1550mm

Maximum Width of Frame:962mm

Width Inside Frame:862mm

Distance between Centres of Rear Wheels:685mm

Weight:74kg

BRAND NEW

SUPERIOR QUALITY

2 TON ENGINE CRANE / HOIST

R.R.P £279.00

EASY FOLDING

6 WHEEL SYSTEM

SPEC

4 POSITIONS 500KG , 1000KG , 1500KG , 2000KG

8 TON HEAVY DUTY RAM GIVING 2 TON LIFTING CAPACITY

1/2 TON LIFT AT FULL EXTENSION

ADJUSTABLE JIB UP TO 1600MM LONG

FOLDS UP FOR STORAGE AND EASY TO ERECT

SIX HEAVY DUTY WHEELS FOR EASY MOBILITY

SIZE WHEN OPEN APPROX 180MM X 2382MM X 1040MM

WEIGHT APPROX 80 KG

SIX HEAVY DUTY WHEELS FOR EASY MOBILITY

COMES THIS SET (2) OF HEAVY DUTY RAMPS MADE FROM STEEL

CAN BOLT RAMP ENDS EASLY TO BOARDS (HARDWEAR SUPPLIED)

THE SIZE OF EACH RAMP IS 1830MM X 230MM AND TAKE A WEIGHT OF 1000lbs

This air operated hydraulic floor jack is ideal for loaded truck and trailer roadside service calls. Heavy enough for busses. Offers 22 Ton Capacity



This air operated hydraulic floor jack is ideal for loaded truck and trailer roadside service calls. Heavy enough for busses.
Offers 22 Ton Capacity
Long "T" handles helps in positioning jack under vehicles with low overhang.
Jack release valve is top mounted at "T" handle and allows jack operation at any handle position.
Compact design easily fits between tandem wheels.
Has a rust inhibitive coating on ram and extension screw.
Self-retracting ram eliminates manual lowering of jack.
7 3/4" diameter hard rubber wheels make manoeuvrability easy.
Safety overload/safety bypass systems prevent jack from being used beyond its rated capacity.
High tech air motor reduces lifting time.
Includes removable saddle and extension screw gives added height up to 4 ¼" when needed.
Low height is 9 inches and without screw extended lifts to 17”

22 ton capacity

3 adapters included

Adapter 1 = ¾”

Adapter 2 = 2 ½”

Adapter 3 = 4 ½”

Operating air pressure: 120 - 180 psi

Weight capacity: 22 tons 48,500lbs

Min. saddle height: 9" 225mm

Max. Saddle height: 17 1/2" 444mm

Chassis length: 20.2" 512mm

Chassis width: 7-1/6" 182mm

Handle length: 47-1/2" 1209mm



Colour is Blue





THIS COMES NEW BOXED AND READY TO DISPATCH

This air operated hydraulic floor jack is ideal for loaded truck and trailer roadside service calls. Heavy enough for busses. Offers 22 Ton Capacity



This air operated hydraulic floor jack is ideal for loaded truck and trailer roadside service calls. Heavy enough for busses.
Offers 22 Ton Capacity
Long "T" handles helps in positioning jack under vehicles with low overhang.
Jack release valve is top mounted at "T" handle and allows jack operation at any handle position.
Compact design easily fits between tandem wheels.
Has a rust inhibitive coating on ram and extension screw.
Self-retracting ram eliminates manual lowering of jack.
7 3/4" diameter hard rubber wheels make manoeuvrability easy.
Safety overload/safety bypass systems prevent jack from being used beyond its rated capacity.
High tech air motor reduces lifting time.
Includes removable saddle and extension screw gives added height up to 4 ¼" when needed.
Low height is 9 inches and without screw extended lifts to 17”

22 ton capacity

3 adapters included

Adapter 1 = ¾”

Adapter 2 = 2 ½”

Adapter 3 = 4 ½”

Operating air pressure: 120 - 180 psi

Weight capacity: 22 tons 48,500lbs

Min. saddle height: 9" 225mm

Max. Saddle height: 17 1/2" 444mm

Chassis length: 20.2" 512mm

Chassis width: 7-1/6" 182mm

Handle length: 47-1/2" 1209mm



Colour is Red

THIS RACING JACK HAS A PROFILE OF ONLY 3-1/2" AND A LIFTING HIGHT OF 17-1/2"

MADE FROM AIRCRAFT ALUMINIUM

AND WILL LIFT 3,000lbs YET ONLY WEIGHS 38lbs

HAS A ONE PIECE FRONT ROLLER AND TWO CASTER TYPE WHEELS AT THE BACK

TWO CARRY HANDLES

A 5" FULLY ROTATING LIFTING PLATE

QUICK LIFT ACTION

MAXIMUM HEIGHT IN FOUR PUMPS

WIDTH 11-1/2"

LENGTH 23-1/2"

HANDLE LENGTH 48"

THIS IS A MUST FOR ANY KEEN MECHANIC