|
Top Inks offer a wide selection of toner refills for Lexmark mono and colour laser printers, fax machines and copiers.General Refilling Procedures:
Rest the Hole Making Tool on its
stand and plug into an outlet. Wait 3 full minutes before using. Position the copper bit on the cartridge in the spot indicated by the photograph and push gently until it melts a
hole in the cartridge. Remove the tool, place it
back on its stand and unplug it. If the small piece of plastic has fallen into the cartridge, it must be removed, as this can damage
your cartridge or cause print defects. If the piece remains in the tool, wait for the tool to cool down and pry it out.
Before opening the Lexmark Toner Refill bottle, turn it
upside down and tap it on a table to loosen the toner and allow it to flow freely. Remove the cap and pull the seal off the bottle. Attach the funnel cap making to sure it is on tightly.
Tilt the funnel cap toward the filling hole
and insert it into the hole. If the toner stops flowing before the cartridge is full, simply remove the toner, close the cap, turn the
bottle upside down and tap it on a table. Once the cartridge is full seal the hole with the plug.
Do not press down on the plug since the cartridge is resting on a table this can
actually damage the photo-optic drum. Instead hold one end of the cartridge up off the table and twist the plug until it fully sealed. Now gently shake the cartridge side to side to
distribute the toner.
Lexmark - 08A0477/08A0478 Lexmark – 10S0150_______ Lexmark – 1382100/1382150/ 1380850/1380950/1380200/
1380520_________________ Lexmark – 1382140________ Lexmark - 1382760
________ Lexmark – 13T0101________
Lexmark - 140100A ________ Lexmark – 140109A________ Lexmark - 140195AX_______ Lexmark - 140198A / X______
Lexmark - 17G0152,
17G0154, 4K00198, 4K00199 12A5740, 1382625, 1382925, 1382929 12A5745, 12A5840, 12A5845,
12A5849__________________ Lexmark E220/E321/E323____ Lexmark T630/T632/T634____ Lexmark T640/T644_________
|
