|
HOW TO REFILL SAMSUNG ML-1610 / ML-2510 / ML-2570 / ML-2010 / DELL 1100
UNSCREW, UNPLUG and POUR
Samsung ML-1610 / Ml-2010 / ML2510 / ML-2570 Toner Refills
Tested for use with the Samsung ML1610 D1 (E) starter cartridge.
|
|
GENERAL NOTES Samsung Toner Refills
RESIST THE TEMPTATION TO SQUEEZE THE BOTTLE during the pouring procedure, otherwise you'll spill the toner powder. While toner powder is considered harmless it does make an awful mess if spilt. Avoid touching the OPC drum (the metal cylinder on the bottom of the cartridge) touching or damaging this cylinder will have a negative effect on the quality and performance of your cartridge.
Refill Procedure
Refilling of the Samsung ML1610 / ML-2010 ML-2510 is quite easy. The cartridge has a
refill plug hidden by a side plate, the plate can be unscrewed and gently prised off to reveal the toner refill plug.
Undo the 2 side plate fixing screws on the right side of the cartridge as you remove
it from the printer (posi-drive type).
(See picture on the left for exact screw positions).
|
|
|
2. Gently prise the side plate
/ blanking cover from the cartridge. You need to prise the cover very gently with a wide flat blade screwdriver or wide thin bladed knife. Work around the perimeter of the cover until it lifts off completely.
N.B This cover also holds the retaining pin for the OPC drum; the pin is fixed in
place to the cover and has a tight mechanical fit. You may need to gently twist the cover as it starts to lift off the cartridge in order to remove this pin from the roller mounting. Don’t worry
there are no loose parts or nasty surprises.
That’s the most difficult bit done!!
|
|
 3. With the side plate removed you will clearly see the traditional Samsung style refill plug, the round shape about the size of a 1 pence
coin (see picture opposite).
4. Gently prise the plug out of the cartridge using a flat blade screwdriver. (We sell replacement plugs if you damage it, so don’t worry too much).
5. Pour 55g of toner into the toner cartridge (approx half the bottle), hold the cartridge at a 45-degree angle, gently tap the bottle
DO NOT SQUEEZE THE BOTTLE, when finished replace the toner refill plug.
6. Replace the side plate by following the reverse of step 2, ensure that the cover “Snaps” back into place before inserting the 2 posi-drive screws.
|
If you need any help or are unsure about anything just give us a call:
(0116) 2823361
Please read our company terms and conditions before use: www.topinks.co.uk
(Copies available via our website or on request).
|
